Publicité
Les langues disponibles
Les langues disponibles
8345076
Harris Type Welder
Style M
IMPORTANT!
• Always wear safety goggles with filter lenses.
• Before starting work, always check for leaks by brushing a thick soap solution on all connections. Open valve
and watch for bubbles to appear at points of leakage.
• Tighten loose connections with a wrench.
• Never use a flame to check for gas leaks.
• Do not use a hose that is worn, or any equipment that is in need of repair.
• Never use oxygen to blow off work or clothing.
• Purge fuel gas and oxygen passages separately before lighting.
• Secure cylinders to cart, wall or post to prevent them from falling.
• Always use reverse-flow check valves on torch and regulator. This reduces the possibility of mixing gases in the
regulator or hoses.
• Do not use oil or grease on the equipment. Oil or grease is easily ignited and is extremely volatile in the
presence of oxygen under pressure.
• Empty cylinders should be kept in specified areas and clearly marked "Empty".
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor have provided the diagrams this manual as a reference tool only. Neither the
manufacturer nor distributor makes any representation or warranty of any kind to the buyer that he or she is qualified
to make any repairs to the product. In fact, the manufacturer and/or distributor expressly states that all repairs and
parts replacements should be undertaken by certified and licensed technicians. The buyer assumes all risk and liability
arising out of his or her repairs to the original product or replacement part(s), or arising out of his or her installation of
replacement parts.
FOREWORD
The equipment you have purchased was thoroughly tested and inspected when it left the factory. With reasonable
care, and by following these instructions, it will give you many years of efficient, trouble-free service. The instructions,
applications, and techniques described in this manual are designed to aid you in the basic principles of welding, flame
cutting, brazing, silver soldering, heating and the safe use of gases, regulators, and torches.
READ THIS BOOK THOROUGHLY AND FOLLOW INSTRUCTIONS!
For technical questions call: 1-800-665-8685
All manuals and user guides at all-guides.com
V 1.0
3
Publicité
