Filling The Mill - ADE KG 1900-1 Mode D'emploi

‚ If the salt and pepper mill no longer
‚ Always change all the batteries at
‚ Only use the type of battery that is
‚ Dispose of old batteries in an

Filling the mill

1. Firmly hold the bottom of the mill.
2. Turn the case cap anti-clockwise as far as it will
go with the other hand.
Note the position of the open lock
symbol.
3. Pull off the case cap by pulling up.
4. Pull off the engine block by pulling up.
5. Fill the grinding chamber a max. of 80% with
salt crystals or peppercorns.
Electric salt and pepper mill KG 1900-x
works, the batteries must be changed.
once.
specified in the "Technical data".
environmentally appropriate way
(see "Disposal").
21