Inserting/Changing Batteries - ADE KG 1900-1 Mode D'emploi

Inserting/changing batteries

Six type LR/R03 1.5 V batteries are required to use
the device (these are included).
1. Firmly hold the bottom of the mill.
2. Turn the case cap anti-clockwise as far as it will
go with the other hand.
3. Pull the cap upwards.
4. Remove the old batteries. Note the information
about disposal of batteries.
5. Insert six batteries (see "Technical data" for the
type) as shown in the diagram. Pay attention to
the correct polarity (+/-).
6. Replace the case cap and turn it clockwise as far
as it will go.
20
Note the position of the open lock
symbol.
Note the position of the closed lock
symbol.
Electric salt and pepper mill KG 1900-x