Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Three short beeps
Two short beeps (every 2 seconds)
One short beep (every 6 seconds)
Troubleshooting Guide
Telephone Solutions
No dial tone
•
Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet.
Ensure the telephone line cord is connected to the base and the
wall jack .
•
Connect another phone to the same jack; if there is still no dial
tone, the problem might be your wiring or local service.
•
The cordless handset may be out of range of the base. Move
closer to the base.
•
Ensure the battery is properly charged (12 hours).
•
Ensure the battery pack installed correctly.
•
Did the handset beep when you pressed the TALK button? The
battery may need to be charged.
Dial tone is OK, but can't dial out
•
Make sure the type of phone service you are subscribed to is
TONE. This handset is TONE only.
Handset does not ring
•
Make sure the handset ringer switch is turned on.
•
The cordless handset may be out of range. Move closer to the base.
•
You may have too many extension phones on your line. Try
unplugging some phones.
•
Check for dial tone. If no dial tone is heard, see No dial tone above.
You experience static, noise, or fading in and out
•
Change channels.
•
The cordless handset may be out of range of the base. Move
closer to the base.
•
Make sure base is not plugged into an outlet with another
household appliance.
•
Charge the battery.
Unit beeps
•
Clean charging contacts on cordless handset and charge cradle
with a soft cloth, remove comma or an eraser.
•
See solutions for "No dial tone" on previous page.
•
Replace the battery.
Troubleshooting Tips
Meaning
Signals an incoming call
Error tone
Page signal
Low battery warning
21
Publicité
