RCA H5400 Guide De L'utilisateur page 18

All manuals and user guides at all-guides.com
Telelphone Operation
3. Press DELETE again, within five seconds, to erase all records. The
display will return to standby mode.
Caller ID Errors
If there is an error in the transmission of information to your Caller ID
phone, INCOMPLETE DATA is displayed.
If you have not subscribed to Caller ID service or it is not working,
NO DATA is displayed.
Call Waiting Caller ID
Provided you subscribe to Caller ID with Call Waiting service from your
phone company, you may see who is calling when you hear the call
waiting tone in the receiver. The CID information appears in the
display after you hear the tone.
Press the FLASH button to put the current call on hold and answer the
incoming call. Press FLASH again when you want to return to the first call.
IMPORTANT: In order to use all of the features of this unit, you must
subscribe to either the standard Name/Number Caller ID Service or
Call Waiting Caller ID Service. To know who is calling while you are on
the phone, you must subscribe to Call Waiting Caller ID Service.
Changing the Battery
Make sure the telephone is OFF (not in TALK mode) before you
replace battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside the battery
compartment and remove the battery pack from the handset.
18