Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3.
Insert the new battery pack and reconnect the battery plug to the
jack inside the compartment.
4.
Put the battery compartment cover back on.
5.
Place handset in charge cradle to charge. If you don't charge the
handset battery properly (for 12 hours) when you first set up
the phone and/or when you install a new battery pack, the
battery's long-term performance will be compromised.
Battery Safety Precautions
•
Do not burn, disassemble, mutilate, or puncture. Like other
batteries of this type, toxic materials could be released which can
cause injury.
•
Keep batteries out of the reach of children.
•
Remove batteries if storing over 30 days.
CAUTION: To reduce the risk of fire or personal injury, use only
the battery listed in the instruction book.
Headset and Belt Clip Operation
Connecting an Optional Headset to the Handset
For hands free conversation, connect the headset (optional) to the
HEADSET jack as shown. The handset receiver and microphone are
disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over
your ear. Move the microphone to approximately 2 to 3 inches from
your mouth.
Connecting the Belt Clip
There are two slots, one on each side of the handset.
•
Attach the belt clip by inserting the sides of the belt clip into the
slots. Snap the ends of the belt clip into place.
Headset jack
Headset plug
Telelphone Operation
Slot for belt clip
19
Publicité
