SEAL 54 EL-1 Manuel D'instructions page 15

4
UNIT DESCRIPTION
Features and benefits of the 54/65 EL:
1
3
10
Figure 7
Identification of parts
1 Wind-up tube
2 Emergency stop buttons
3 Image guide
4 Upper unwind shaft
5 Unwind brake
6 Control panel
7 Nip Hand Wheel
8 Lower unwind shaft
9 Foot switch
10 In-feed Table
The Ratings/Serial label is located on the rear side of the machine by the power inlet.
10
2
4
5
9
Wind-up for the release-liner
To stop machine in case of emergency
To help start images (Optional on some models.)
The shaft is suitable for material with a 3-inch core
A simple means of setting the unwind tension
Controls rotation of the rolls and standby
To adjust the gap between the rollers
The shaft is suitable for material with a 3-inch core
Used to engage slow mode
Flat surface to rest material to be worked on
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
8
7
6