7.3
INSTALL THE GRASS CATCHER
12
13
1. Remove the mulch plug.
2. Open the rear discharge door (12) and hold it.
3. Hold the the grass catcher by its handle (15) and engage
the hooks (14) on the slots (13).
4. Close the rear discharge door.
7.4
INSTALL THE MULCH PLUG
F
12
9
1. Remove the grass catcher.
2. Open the rear discharge door (12) and hold it.
3. Hold the mulch plug (9) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.5
SET THE BLADE HEIGHT
The machine can be set to different blade heights.
English
7
15
14
6
1. Pull the height adjustment lever (6) rearward to increase
the blade height.
2. Pull the height adjustment lever forward to decrease the
blade height.
7.6
INSTALL THE BATTERY PACK
16
5
WARNING
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the engine stops before
you install or remove the battery pack.
•
Read, know, and follow the instructions in the battery
and charger manual.
1. Open the battery door (5).
2. Align the lift ribs on the battery pack (16) with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
7.7
REMOVE THE BATTERY PACK
1. Open the battery door.
2. Push and hold the battery release button.
3. Remove the battery pack from the machine.
8
OPERATION
WARNING
Wear eye protection during operation.
9
EN
17