Gaggenau DF 260 Notice D'utilisation page 16

Open the door. Power on the unit.
A
Release both buttons.
A
C
= Off and
Press START button. The set value is saved.
Close the door.
Open the door. Power on the unit.
A
Release both buttons.
Press the "A" button until the display indicates "d:00".
Press the "C" button to turn intensive drying on or off. "d:01" = ON or "d:00" = OFF
Press START button. The set value is saved.
Close the door.
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
Open the door. Power on the unit.
A
Release both buttons.
Press the "A" button until the display indicates "P:01".
Press the "C" button to change auto power off setting. "P:00" = dishwasher does not turn off
automatically, "P:01" = dishwasher turns off after 1 minute, "P:02" = dishwasher turns off after 120
Press START button. The set value is saved.
Close the door.
PowerBeam®
An LED illuminates the floor to indicate the unit is running. Do not open the dishwasher door until the LED is no
longer visible on the floor.
Note: If the appliance is installed at eye-level, the LED is not visible.
To change setting:
Open the door and press the ON/OFF button.
1
Hold down the A button and press and hold START until the display indicates "H:00".
2
Release both buttons. The LED for the A button flashes and display indicates "H:00".
3
Press the A button until the display shows "I:01"(factory setting or your previous setting).
4
Press the C button to switch between "I:01" = ON and "I:00" = OFF and press START to save the setting
5
and close the door.
All manuals and user guides at all-guides.com
= loudest
.
.
15