Publicité
Les langues disponibles
Les langues disponibles
26
DSR® Switch Installer/User Guide
Controlling the status flag
The status flag displays on your desktop and shows the name or EID number of the selected
target device or the status of the selected port. Use the Flag dialog box to configure the flag to
display by target device name or EID number, or to change the flag color, opacity, display time
and location on the desktop. Table 3.6 describes each status flag.
Table 3.6: OSCAR Interface Status Flags
Flag
To access the OSCAR interface Flag dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Flag to open the Flag dialog box shown in Figure 3.5.
Figure 3.5: OSCAR Interface Flag Dialog Box
To determine how the status flag is displayed:
1. Select Name or EID to determine what information will be displayed.
All manuals and user guides at all-guides.com
Description
Flag type by name
Flag type by EID number
Flag indicating that the user has been disconnected from all systems
Flag indicating that Broadcast mode is enabled
to open the Main dialog box.
Print Screen
Publicité
