Avocent DSR 1020 Guide D'installation Et D'utilisation page 123

•
Ctrl-F11
appear. Press
previous screen will reappear.
3. When finished, press
Serial IQ module pinouts
Table C.1 lists the pinouts for the serial IQ module.
Table C.1: Serial IQ Module Pinouts
DB9- Host Signal Name
F Pin Description
1 DCD - Data Carrier Detect
2 RXD - Receive Data
3 TXD - Transmit Data
4 DTR - Data Terminal Ready
5 GND - Signal Ground
6 DSR - Data Set Ready
7 RTS - Request to Send
8 CTS - Clear to Send
9 N/C - Not Connected
All manuals and user guides at all-guides.com
: Clears the history buffer. If you choose this option, a warning screen will
to delete the history buffer or
Enter
to exit History mode and return to On-Line mode.
Ctrl-F10
Signal Flow
Out of SRL
Out of SRL
In to SRL
In to SRL
N/A
Out of SRL
In to SRL
Out of SRL
N/A
to cancel the action. The
Escape
SRL Signal Name Description
DTR - Data Terminal Ready
TXD - Transmit Data
RXD - Receive Data
DSR - Data Set Ready
GND - Signal Ground
DTR - Data Terminal Ready
CTS - Clear to Send
RTS - Request to Send
N/C - Not Connected
Appendices 113