Cisco Linksys WRT54GX Guide D'installation Rapide page 8

J
Wireless SSID Broadcast. When
wireless clients survey the local
area for wireless networks to
associate with, they will detect
the SSID broadcast by the
Router. To broadcast the
Router's SSID, keep the default
setting, Enable. If you do not
want to broadcast the Router's
SSID, then select Disable.
K
Change these settings as
described here and click the
Save Settings button to apply
your changes.
L
Power your broadband
modem off and back on
again.
M
Restart or power on your PCs so
they can obtain the Router's
new settings.
N
To test the Router's settings,
open your web browser from
any computer. In the browser's
Address field, enter
www.linksys.com/registration
and press the Enter key.
Congratulations! The installation of
the Wireless-G Broadband Router
with SRX is complete.
8
All manuals and user guides at all-guides.com
For more advanced
NOTE:
settings and security options,
refer to the User Guide on the
Setup CD-ROM.
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Registration
http://www.linksys.com/registration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2005
Cisco Systems, Inc. All rights reserved.
WRT54GX-EU-LA-UK-QIG-50110NC JL