Télécharger Imprimer la page

Endress+Hauser iTEMP PCP TMT121 Mode D'emploi page 3

Transmetteur de température

Publicité

;
Abmessungen in mm (inch)
<
Dimensions in mm (inch)
=
Dimensions en mm (inch)
;
Montage
❑ Zulässige Umgebungstemperatur:
-40 bis 85 °C (für Ex-Bereich siehe Ex-Zertifikate)
❑ Einbauort: Montage auf Hutschiene nach EN 50 022-35,
z. B. im Schaltschrank
❑ Einbaulage: keine Einschränkungen
❑ Sicherheitshinweis:
Das Gerät darf nur von einem Netzteil mit energiebe-
grenzten Stromkreis nach IEC 61010-1 gespeist werden.
<
Installation
❑ Ambient temperature:
-40 to 85 °C (-40 to 185 °F). For Ex-area see
Ex-Certification
❑ Installation area: Installation on DIN rail according to
EN 50 022-35, e.g. in control panel
❑ Installation angle: No limit
❑ Safety instructions: The unit must only be powered by a
power supply that operates using an IEC 61010-1
compliant energy limited circuit.
=
Montage
❑ Température ambiante :
-40 à 85 °C (pour zone Ex, voir certificat Ex)
❑ Position de montage : Montage sur rail profilé selon
EN 50 022-35, par ex. en armoire électrique
❑ Implantation : Pas de restriction
❑ Conseils de sécurité :
L'appareil doit obligatoirement être alimenté par une ali-
mentation stabilisée selon IEC61010-1.
3

Publicité

loading