Electrolux EOC69900 Notice D'utilisation page 12

12 electrolux
Symbol Function
Start time
End time
Set and Go
Runtime
Reminder
Setting the clock functions
1. Go to Functions menu and set a heating
function and a temperature.
2. Go to Timers menu and set the clock
function.
3. Touch
or to set the necessary
time. Touch OK .
When the clock function ends, an acous-
tic signal sounds. The appliance deacti-
vates. The colours on display change
and clock function symbol flashes.
4. Touch a sensor field to stop the signals.
When you use Food probe, the func-
tions Duration and End Time do not op-
erate.
You can set the Reminder function
when the appliance is on or off. To set
the Reminder function when the appli-
ance is off, touch
necessary time. Touch OK .
The Reminder function stays on also
when you deactivate the appliance.
Set and Go
Set the heating function and the tempera-
ture. In the Timers menu set the Set and Go
function and touch OK . The appliance is in
the standby mode. Touch any sensor field
to start the set heating function.
Heat and hold
You can activate or deactivate the func-
tion in Settings menu.
AUTOMATIC PROGRAMMES
The automatic programmes give optimum
settings for each type of meat or other rec-
ipes. Refer to the recipe book.
• Meat programmes with Weight Automat-
ic ( Recipes menu)
All manuals and user guides at all-guides.com
To set when the appliance activates.
To set when the appliance deactivates.
To set the settings for the heating function and activate it later.
To set a count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
To set a countdown. This function has no effect on the opera-
tion of the appliance.
The Heat and hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
When the function ends, an acoustic signal
sounds.
The Heat and hold function operates for 30
minutes.
The Heat and hold function stays on if you
change the heating functions.
Time Extension
or to set the
The Time Extension function makes the heat-
ing function continue after the set time ends.
• Applicable for all heating functions with
• Not applicable for heating functions with
• Meat programmes with Food probe Auto-
• Recipe Automatic ( Recipes menu)
Description
Conditions for the function:
• The set temperature is more than
80°C.
• The Duration function is set.
You can activate or deactivate the func-
tion in Settings menu.
function Duration or Weight Automatic .
food probe.
matic ( Recipes menu)