Christie LX1750 Mode D'emploi page 24

Network PIN code setting
This is to set the Network PIN code to restrict
the access from an unauthorized person
through the network.
Enter a 4-digit number as the Network PIN
code onto the text box and click Set.
The projector begins restarting and it takes
about 10 seconds. Close (Quit) the web browser and access to the login page again in 10
seconds. This is to perform the login authentication firmly.
The default Network PIN code [0000] means no Network PIN code is set.
W hen you connect the projector to the network, it is recommended to set a new Network PIN
✐
code. Only a four-digit number is valid for the Network PIN code.
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
All manuals and user guides at all-guides.com
Initial setting
23