Nilfisk ALTO B23 Stainless Manuel D'instructions page 44

6 Operation
6.1 Ready for operation
6.2 Stop
44
Bedieungsanleitung auf www.gluesing.net
All manuals and user guides at all-guides.com
1. Now the washer is ready for operation. If the dirt is stubborn
we recommend the use of a brush.
2. Activate the trigger of the spray handle.
If necessary, adjust the flow on the control valve (6).
WARNING!
Never direct the water jet towards people, pets, elec tric wiring, or
the machine itself.
If the washer is not being used but must be ready for ope ra ti on
place the spray handle in the holder of the basket of the wash tray.
• Deactivate the spray handle and lock it by turning the safety
knob (A).
Always switch off the mains when the washer is being stored.
Depressurize the tank by activating the spray handle or releasing
(pulling) the safety valve.
If the B23 Stainless is not to be used for a prolonged period and
if frost protection may be required, the tank can be completely
emptied via the drainage socket (17) below the tank. Remember to
pull in the compressed-air valve (8).
Waste water must be disposed of in the correctly prescribed manner.
WARNING!
Never attempt to open the pressure tank or detach the hose
when the system is under pres su re.
A