∫
Temporarily Storing the Lens Hood
1
Rotate the lens hood C in
the direction of the arrow
and then remove.
2
Align the mark B (
the mark on the tip of the lens.
3
Rotate the lens hood in the direction of the
arrow until it clicks into place.
All manuals and user guides at all-guides.com
) on the lens hood with
Note
• If you use a lens hood and the flash at the same time, the
lens hood will block the light from the flash, causing the lower
portion of the screen to darken (vignetting) and making it
impossible to adjust the amount of light. We recommend not
using the lens hoods and flash at the same time.
7
SQT1299