Publicité
Les langues disponibles
Les langues disponibles
4.2 DMX ADDRESS SETTING
To set the DMX address, press the MENU button to show DMX Address on the display. Press the
ENTER button and the display will blink. Use the DOWN and UP button to change the DMX
address. Once the address has been selected, press the ENTER button to setup, to go back to
the functions without any change press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Mode
9CH
12CH
16CH
9-CH
CHANNEL
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
12-CH
CHANNEL
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
CH 10
CH 11
CH 12
Unit 1 address
1
1
1
VALUE
FUNCTION
0-255
PAN (0-630)
0-255
TILT (0-240)
0-255
0-255
RED (0-100%)
0-255
GREEN (0-100%)
0-255
BLUE (0-100%)
0-255
WHITE (0-100%)
0-255
DIMMER (0-100%)
0-255
SOUND ACTIVE
VALUE
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
Unit 2 address
Unit 3 address
10
13
17
STROBE
FUNCTION
TROBE
DIMMER (0-100%)
PAN (0-630)
PAN FINE
TILT (0-240)
TILT FINE
SOUND ACTIVE
COLOR EFFECT
RED (0-100%)
GREEN (0-100%)
BLUE (0-100%)
WHITE (0-100%)
Unit 4 address
19
28
25
37
33
49
Publicité
