SX Lighting ROCKIN'HEAD Notice D'utilisation page 13

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center if needed.
Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

Caution：
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.

DO replace the bulb once it is damaged, deformed or life-expired.

DO NOT look directly at the light while the bulb is on.

Never touch bulb with bare fingers, as it is very hot after using.

DO NOT start on the unit without bulb enclosure or when housing is damaged.

Installation :
The unit should be mounted by its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. The structure to which you are attaching the unit should be able
to support 10 times the weight of the unit. Also always use a safety cable that can hold 12 times the weight
of the unit when installing the fixture.
The equipment must be fixed by professionals.
2.TECHNICAL SPECIFICATIONS
PAN / TILT : 630° / 240° with adjustable speed
-
Working modes : DMX, Master/Slave, Sound-Active
-
DMX channels : 9, 12, 16
-
Dimming 0-100%
-
Electronic strobe with random effects
-
 Power supply : AC 100-240V, 50/60Hz
 Consumption : 100W
 Light source : 7 x 12W LED CREE
 Fuse : T 6.3A
 Dimensions : 375 x 322 x 445 mm
 Weight : 5kg