Publicité
Les langues disponibles
Les langues disponibles
DEFAULTS: press ENTER to confirm your selection. Use UP and DOWN buttons to select NO or
YES. If you select YES, you can go in sub-menu and select PRO or AUTO
PRO (defaut settings for professional users)
AUTO (default settings in AUTO mode)
FIXTURE RESET: press ENTER to confirm your selection. RESET will blink on the screen. Press
ENTER to confirm, the channels of the unit will return to their standard position.
HOME POSITION ADJUSTEMENT
To go into OFFSET menu, press 3 seconds on ENTER button. Use UP and DOWN buttons to select
PAN OFFSET or TILT OFFSET. Press ENTER. Adjust the value from 127 to -127. Press ENTER to
save or MENU to go back to previous menu.
4. HOW TO CONTROL THE UNIT
4.1 MASTER / SLAVE MODE, BUILT-IN PREPROGRAMMED FUNCTION
By linking the units together in master/slave, the first unit (the master) will control the other units (the slave)
to give an automatic, sound activated, synchronized light show. This function is good when you want an
instant show.
To set the first unit as a master, press the ENTER button to show the SHOW MODE on the display. Now
use the DOWN and UP buttons up to select the Show 1, Show 2, ... and the master LED will be constantly
lit and the sound LED will flash to the music. To set the unit as a slave, press the ENTER button to show
SLAVE MODE on the display. Now use the DOWN and UP buttons up to select Slave 1 (normal) and Slave
2(2-light show) mode, and the SLAVE LED will be constantly lit.
In Slave Mode, you can select SLAVE 2 meaning 2-light show in order to get more contrast movements
between the devices, even if you have 2 devices only.
Mode Slave 1
Blackout : YES
Sound : OFF
PAN inverse : NO
TILT inverse : NO
Backlight: OFF
Mode Slave 1
Blackout : NO
Sound : ON
PAN inverse : NO
TILT inverse : NO
Backlight : ON
Publicité
