Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
How to Use Your Unit
How to Stop:
1.
Set the On/Off switch to "OFF".
To Use Quick Connect Coupling
and Studs
1.
Apply thread sealant tape to
threads of quick connect
coupling and studs.
2.
Assemble the quick connect
coupling to the hose. Attach the
studs to the blow gun and
female tire chuck. Tighten
securely. This will make it easier
to change over these
accessories.
3.
Pull quick connect coupling back
and insert stud. See figure
above.
4.
Slide coupling forward to lock in
place.
To Use Female Tire Chuck
1.
2.
3.
On/Off
Switch
4.
To Use Blow Gun
1.
the blow gun, the safety nozzle
MUST be assembled.
2.
NOTE: To use the inflating needle or
tapered inflator the blow gun adapter
has to be assembled to blow gun.
3.
Lever
4.
5.
13- ENG
Attach female tire chuck to hose.
See the "How to Start"
paragraph to start air
compressor.
Place the female tire chuck onto
the tire valve stem of the tire to
be inflated.
Slowly increase the pressure
setting of the adjustable pressure
valve to the tire manufacturer's
recommended PSI. Note: To
ensure correct tire pressure use a
tire pressure gauge.
Attach the blow gun to hose.
If an accessory is
not being used with
Safety Nozzle
Assemble the safety nozzle or
blow gun adapter to blow gun.
See next figure.
Attach the inflating needle or
tapered inflator to the blow gun
adapter on the blow gun.
Blow Gun Adapter
Inflating Needle
Tapered Inflator
Safety Nozzle
See the "How to Start"
paragraph to start air
compressor.
Depress lever on blow gun to
release the air.
D24483
Publicité
