"SMART DOOR" button "
(AUTOMATIC DOOR OPENING)
(only on some models).
This option enables a special device that
opens the door by a few centimetres during
or at the end of the drying cycle (depending
on the programme).
This ensures the natural and efficient drying
of dishes. The duration of the selected cycle
will automatically change to obtain the
optimal temperature for the rinse cycle; this
significantly reduces energy consumption.
The automatic door opening during the last
drying phase enables the air to circulate,
removing the risk of bad odours.
When the door opens, the message "SMART
DOOR" will appear on the display.
This option is automatically enabled
in the "ECO" programme. In any case,
it is possible to disable it. The "SMART
DOOR" feature is not available in the
"ZOOM
39'",
"PREWASH" programmes.
WARNING
With this option selected, you must
not in any way prevent the door from
opening or force it shut, as this would
damage the mechanism. Ensure that
there is free space in front of the door
and, before closing, wait for the
opening
device
activity.
"TABS" button
This option optimises the use of "TABS"
("3 in 1"/"4 in 1"/"5 in 1", ecc.) combined
detergents. By pressing this button, the
selected washing programme is modified to
get
best
performance
detergents (furthermore, the salt and rinse
aid shortage lights are de-activated).
"RAPID
24'"
and
to
complete
from
combined
WARNING
Once selected, this option keeps
being on (light on) also for next
washing cycles and it can be de-
activate (light off) only by pressing the
button once again.
This option is recommended when
using the RAPID 24' program, the
duration of which will be extended for
about
15
detergent tablets to achieve a better
performance.
"NO SALT" warning light
If your dishwasher requires salt, "SALT"
will be displayed when selecting the
programme. The appearance of whitish
stains on dishes is generally a warning sign
that the salt container needs filling.
In order to guarantee the correct
functioning of the salt indicator light,
YOU MUST ALWAYS FULLY REPLENISH
THE SALT CONTAINER.
"DELAY START" button
Dishwasher start time can be set with this
button, delaying start from 1 to 23 hours.
Proceed as follows to set a delayed start:
l
its
Open the door.
l
Turn on the dishwasher by pressing the
"ON/OFF" button for about 3 sec.
l
Select the washing programme.
l
Press
the
("0:30" will appear on the display).
l
Press the button again to increase the
delay (on each press the delay is
increased by 30 mins., up to a maximum
of 23:30.
106
minutes,
allowing
"DELAY
START"
the
button