Technical Data - Ecolab DG1-III-DLA-PCB Manuel D'utilisation

Technical data

13 Technical data
In this chapter you will find the technical data of the DG1-III.
Data
RKI test number
Supply voltage (tolerance +/- 10%)
Control voltage (-10%, unregulated)
Power consumption
Back-up fuse
Appliance class
Equipment classification
Dosing tolerance of the set concentration value
Concentration ranges at max. 14 l/min (840 l/h)
1
Flow rate
Concentration ranges at max. 10 l/min (600 l/h)
Flow rate 2
Product viscosity
Conductance of the product
Water hardness
Water flow pressure, min.
(corresponds to ~ >150 l/h)
Water flow pressure, max.
Water inlet temperature, max. / unit
Weight
Emissions noise pressure level
Permitted ambient temperature
Air humidity
Maximum altitude (above sea level)
Released area of application
Air humidity
1
Only in conjunction with flow regulator 14 l/min
2 Only in conjunction with flow regulator 10 l/min
Environmental condition:
Installation is only permitted in closed, frost-protected rooms.
Water quality of the inlet pipe:
Drinking water (no demineralised water, no service water).
All information is subject to technical changes, as the products are subject
to constant further development.
MAN049250 Rev. 1-01.2021
AC 230 (50/60) V (Hz)
DC 24, max. 30 V
Pollution degree II
wet environment
60
Value Unit
max. 50 W
max. 16 A
Class II
max. + 5 %
0.25 - 3 %
0.25 - 5 %
< 50 mPas
> 500 µS/cm
> 3 dH°
0.1 (1) MPa (bar)
0.7 (7) MPa (bar)
30 °C
14 kg
< 70 dB(A)
5 - 40 ° C
max. 80 %
2000 m
max. 80 %