Power Fist 8382988 Mode D'emploi page 11

8382988
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
TROUBLE SHOOTING
Problem
Fault LED is lit
Battery is not accepting a charge
Charging a very cold battery
For technical questions call: 1-800-665-8685
Battery Charger with 2A Trickle Charge
Solution
Fault LED may light when the voltage of the battery is less than 9V.
Make sure that the charger is plugged into a "live" 110/120V AC
outlet and Power LED is lit.
Unplug the charger and check the battery connections to ensure that there is
a good connection at the battery terminal and/or vehicle chassis.
Check that the correct charge rate was selected for the battery being charged.
Ensure enough charging time was allowed to charge the battery.
If the battery to be charged is extremely cold (in temperatures bellow freezing
- 0°C / 32°F), it cannot accept a high rate of charge, so the initial charge rate
will be slow. The rate of charge will increase as the battery warms.
Never attempt to charge a frozen battery.
V 2.0
11