LG MT48 Serie Manuel De L'utilisateur page 10

Preparing
NOTE
• Image shown may differ from your TV.
• Your TV's OSD (On Screen Display) may differ slightly from that
shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned off if it will not
be watched for some time, as this will reduce energy consumption.
• The energy consumed during use can be significantly reduced
if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
• The items supplied with your product may vary depending on the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB memory stick does not fit into your TV's USB port.
B
A
*A 10 mm
*B 18 mm
• Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
• Do not use any unapproved items to ensure the safety and product
lifespan of the product.
• Any damages or injuries by using unapproved items are not
covered by the manufacturer's warranty.
• Some models have a thin film attached on to the screen and this
must not be removed.
6
Lifting and moving the TV
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
• It is recommended to move the TV in the box or packing material
• Before moving or lifting the TV, disconnect the power cord and
• When holding the TV, the screen should face
• Hold the top and bottom of the TV frame firmly. Make sure not to
B
A
• When transporting the TV, do not expose the TV to jolts or
• When transporting the TV, keep the TV upright; never turn the TV
• Do not apply excessive pressure to cause flexing /bending of frame
• Avoid touching the screen at all times, as this may result in
• When handling the TV, be careful not to damage the protruding
Setting up the TV
• Do not carry the TV upside-down by holding the stand body (or
• When attaching the stand to the TV set, place the screen facing
• Lift up the latch at the bottom of the stand base and detach the
that the TV originally came in.
all cables.
away from you to avoid damage.
hold the transparent part, speaker, or speaker grille area.
excessive vibration.
on its side or tilt towards the left or right.
chassis as it may damage screen.
CAUTION
damage to the screen.
joystick button.
CAUTION
stand base) as this may cause it to fall off, resulting in damage
or injury.
down on a cushioned table or flat surface to protect the screen
from scratches.
NOTE
stand base from the TV.