AEG Loop Guide D'utilisation Rapide page 16

16
9.4 Register a Handset
Your handset is pre-registered to the base station. Up to five handsets
can be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER" will be displayed on the handset screen, register your
handset following the process below.
• Press and hold on the base station for about five seconds, the base
station is entered into registration mode.
M
• Press and
M
• Press and you are requested to enter the 4-digit system PIN.
• Enter the 4-digit system PIN and press
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number
is shown in the handset display in standby mode.
10 CALLER DISPLAY (NETWORK DEPENDENT)
10.1 Call List
This feature is available if you have subscribed to the Caller Line
Identification service from your telephone company. Your phone can
store up to 50 received calls with date/time information in the Call List.
The number will be shown on the LCD when the phone is ringing. If the
number matches with one of the entries in your Private Phonebook,
the caller's name stored in the private phonebook will be displayed
with the number. The handset will ring with melody associated with
that phonebook entry.
The call list information might not be available for every incoming call.
The callers might intentionally block their names and / or telephone
numbers.
Call log display screen messages
WITHHELD
OUT OF AREA
When the list is full, and a new call is received, the oldest entry will be
deleted automatically.
All manuals and user guides at all-guides.com
.
to select REGISTRATION.
The caller is blocking the telephone number.
This caller's number is unavailable.
M
to confirm.