AEG Loop Guide D'utilisation Rapide page 12

12
NOTE
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.8 Make an Internal Call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls
from one handset to another handset and make conference calls.
If the called handset is not answered within 60 seconds, the called
handset will stop ringing and the calling handset will return to standby
mode.
7.8.1 Call Another Handset
• In idle mode, press
handsets except the calling handset.
• Enter the desired handset number to intercom with.
• The called handset rings and press
establish the internal call.
NOTES
• If only one handset is registered to the base station, press
it will display "NOT POSSIBLE".
• If only two handsets are registered to the base station, press
will connect to another handset immediately.
7.8.2 Transfer an External Call to Another Handset
During an external call:
M
• Press and
M
• Press and
• The external call is put on hold automatically and the called handset
rings.
T
• Press on the called handset to establish an internal call.
O
• Press on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
• The external call is transferred to the called handset.
All manuals and user guides at all-guides.com
M
and the screen displays all registered
.
to select INTERCOM.
.
to select the desired handset to intercom with.
T
on the called handset to
m
and
m