Danby DUFM505WDB Guide D'utilisation page 7

Door Removal &
Replacement
Base Grille
Top Hinge
A. Top Hinge Cover
B. 3 / " Hex-Head Hinge Screws
8
C. Top Hinge
Bottom Hinge
A
B
A. Door Stop Screws
B. Door Stop
C. Hinge Pin
D. Hinge Pin Nut
E. 5 / " Hex-Head Hinge Screws
8
1. Locate the two front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on the bottom of the
freezer. The back of the freezer rests on two fixed supports.
A
1A
A. Cabinet Hinge Hole Plugs
Left Hand Hinge
Door Stop
1B
A
B
A
B
C
C
D
E
A. Door Stop Screws
1C
B. Door Stop
C. Hinge Pin
D. Hinge Pin Nut
C
E. 5 / " Hex-Head Hinge
8
D Screws
E
Adjust the Door
Door Swing Reversal (optional)
2
4
Right Hand Hinge
Door Stop
3
Handle
A
B
C
B
A
A. Handle Trim
B. Handle Screws
C. Handle
3. Adjust the front legs enough to lift the cabinet up off of the
floor.
NOTE: If your model is equipped with rollers, the front legs
should be lowered enough to lift the rollers off of the floor to
ensure the freezer does not roll forward when the door is
opened.
5
Door Handle
Seal Screw
1-1
7