Grillo 2500 Emploi Et Entretien page 8

IDENTIFICATION
The motor hoe is fitted with a nameplate on the chassis with the serial number of the machine.
This number must be stated when requesting service or ordering spare parts.
SERVICING
This handbook provides the instructions for using the motor hoe. For a correct basic maintenance contact
your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and interchangeability.
Each order should include the machine serial number and the code of the spare part needed.
For engine spares, refer to the information in the specific handbook.
WARRANTY
The warranty is subject to the terms and conditions stated on the card.
As regards the engine, the individual manufacturers' conditions apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
No 1 throttle wire
No 1 clutch wire
No 1 throttle lever
No 2 right tiller tines with screws
No 2 left tiller tines with screws
HOW TO ORDER SPARE PARTS
Always state the machine serial number and the code of the spare part needed. Contact your nearest
Grillo service centre. For more information address your enquiries to:
GRILLO S.p.A.
Via Cervese 1701 - 47023 CESENA (FC) ITALY
Tel. 0039 - 0547 - 633.111 / Fax 0039 - 0547 - 632.011
Web site: www.grillospa.it / e-mail: grillo@grillospa.it
2500 TECHNICAL DATA
ENGINES:
BRIGGS & STRATTON INTEK 5,5
INTERMOTOR LGA226
MINSEL 165
SUBARU EX17
MACHINE:
Clutch: dry, manual control, inverted clutch.
Gearbox: with gears in oil bath; 2 forward speeds.
Travel speeds with 5.1-10 tyres and engine at 3600 rpm.:
I 4.7 Km/h
II 11.1 Km/h
Handlebars: With vertical and horizontal adjustment.
Tiller implement: Standard 65 cm with conversion to 92 cm.
Standard machine dimensions: 115 x 65 x 100 cm.
Weight: with petrol engine: 65 Kg.
Implements and attachments: Plough - Furrower - Ratchet hubs - Wheel extensions - Towed trailer -
Wheels with tyres - Towing bar - Tiller extensions - Ballast weights.
IDENTIFICATION AND AFTER-SALES SERVICE
tipo
serie
massa c.a.
anno
6
2500
0 0 0 0 0 0
65 kg.
KW/giri minuto
0000
3,7/3600