Télécharger Imprimer la page

Bosch GPL3T Consignes De Fonctionnement/Sécurité page 3

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
SAFE OPERATING PROCEDURES:
Be sure to read and understand all instructions in
WARNING
!
this manual before using this product. Failure to
follow all instructions may result in hazardous radiation exposure,
electric shock, fire, and/or bodily injury.
IMPORTANT: The following labels are on your laser tool for your
convenience and safety. They indicate where the laser light is emitted
by the level. ALWAYS BE AWARE of their location when using
the level.
ALWAYS make sure that any bystanders in the vicinity of use are
made aware of the dangers of looking directly into the laser tool.
DO NOT remove or deface any warning or caution labels. Removing
labels increases the risk of exposure to laser radiation.
DO NOT place the laser tool in a position that may cause anyone to
stare into the laser beam intentionally or unintentionally. Serious eye
injury could result.
ALWAYS remove the batteries when cleaning the laser light aperture
or laser lens.
ALWAYS turn the laser tool "OFF" when not in use. Leaving the laser
tool "ON" increases the risk of someone inadvertently staring into the
laser beam.
DO NOT operate the laser tool in combustible areas such as in the
presence of flammable liquids, gases or dust.
ALWAYS position the laser tool securely. Damage to the laser tool
and/or serious injury to the user could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the
manufacturer of your laser tool. Use of accessories that have been
designed for use with other laser tools could result in serious injury.
DO NOT use this laser tool for any purpose other than those outlined
in this manual. This could result in serious injury.
DO NOT leave laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable
parts inside. Disassembling the laser will void all warranties on the
product. Do not modify the product in any way. Modifying the laser
tool may result in hazardous laser radiation exposure.
ELECTRICAL SAFETY PROCEDURES
Batteries can explode or leak, and can cause injury
WARNING
!
or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label
and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same
time with new batteries of the same brand and type.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fire.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be used for several months.
Safety Rules
-3-

Publicité

loading