Tronic TKHU 2 A1 Mode D'emploi page 20

Troubleshooting
A connected device will not charge (the white
operating LED e does not light up).
No connection to the car's cigarette lighter socket.
♦
Check the connection.
Depending on the vehicle type, it is possible that
♦
the ignition has to be switched on first.
The white operating LED e goes out after a
device has been connected
The car USB adapter 0 is overloaded and will no
♦
longer charge attached devices. The internal over-
current protection has been triggered. Disconnect
all connected devices from the car USB adapter 0.
The white operating LED e lights up immediately
and the car USB adapter 0 is ready for use again.
NOTE
If you cannot solve the problem with the suggest-
►
ed solutions, please contact the Service Hotline
(see section Service).
│ GB │ IE │ NI
■ 16 TKHU 2 A1