Toro Flex-Force Power System 60V MAX Manuel D'instructions page 13

Operation
Note:
Determine the left and right sides of the machine from the normal operating position.
Before Operation
Installing the Battery Pack
Important:
Operate the battery pack only in temperatures that are within the appropriate range; refer
to Specifications (page
1. Ensure that the safety key is not installed to the machine.
2. Ensure that the vents on the battery are clear of any dust and debris.
3. Lift up the battery-compartment lid (A of
4. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the
compartment until it locks into place (B of
5. Close the battery-compartment lid (C of
Note:
If the battery-compartment lid does not close completely, the battery is not fully installed.
10).
Figure
Figure
8).
Figure 8).
8).
Figure 8
11
g341293