Publicité
Les langues disponibles
Les langues disponibles
Features
UPS Features
ON/OFF/MODE Button: Press and hold for 2 seconds to turn on
the UPS and 2.5 seconds to turn the UPS off. When the UPS is
on, tap this button repeatedly to advance through LCD display
screens.
MUTE/SELECT Button: Use this button to toggle selection options
for: self-test, enable/disable alarm, LCD brightness and ECO
feature. This button can also be used to temporarily mute an
active alarm by briefly pressing it.
Tel/DSL Line Protection Jacks: These jacks protect equipment
against surges over a single phone line. Connecting your
equipment to these jacks is optional. Your UPS will work properly
without this connection.
USB Communications: This port connects your UPS system to
any computer, enabling PowerAlert Software to automatically save
open files and perform unattended shutdown in the event of a
power failure and is also required to utilize the ECO feature. Use
with included cable featuring a USB connector to connect to your
computer's port and the RJ45 connector to connect to the UPS
system port. Connecting your equipment to this port is optional.
Your UPS will work properly without this connection.
Battery Backup Protected/Surge Protected Outlets: Provide
both battery backup and surge protection. Plug your computer,
monitor and other critical equipment into these outlets.
Note: Do not plug laser printers into these outlets.
Surge-Only Protected Outlets: Provide surge and line noise
protection, not battery backup or the ECO feature. Plug equipment
that does not require battery backup during a utility power failure
into these outlets, such as a printer, scanner or fax machine.
Surge-Only Protected ECO Outlets: These outlets provide surge
and noise protection, not battery backup. Your UPS system can
save energy by automatically turning off these outlets when it
detects that your computer is turned off or in standby mode.
Make sure that any device connected to the ECO outlets can be
turned off without interrupting your Internet connection, local
network or other essential services.
Resettable Input Circuit Breaker: Protects your electrical circuit
from overcurrent draw from the UPS load. If this breaker trips,
remove some of the load, then reset it by pressing it in.
6
17-05-138-933071.indb 6
6/2/2017 11:44:28 AM
Publicité
