Télécharger Imprimer la page

Whirlpool CGM2743BQ Instructions D'installation page 26

Sécheuse à usage commercial à gaz ou électrique

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE INSTRUCTIONS
Clean lint screen before and after each cycle.
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would
obstruct the flow of combustion and ventilation air.
IF YOU NEED ASSISTANCE
Contact your authorized Commercial Laundry distributor. To locate your authorized Commercial Laundry distributor, or for web
inquiries, visit www.WhirlpoolCommercialLaundry.com.
If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or
maintaining your dryer not covered in the Installation Instructions.
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate
located in the dryer door opening.
26
If dryer does not operate, check the following:
Electrical supply is connected.
Circuit breaker is not tripped or house fuse is not blown.
Door is closed.
Controls are set in a running or "on" position.
START button has been pushed firmly.
For gas dryers, check that gas supply shut-off valves are set
in open position.

Publicité

loading

Ce manuel est également adapté pour:

Cgm2793bqCem2743bqCem2793bq