Publicité
Les langues disponibles
Les langues disponibles
TEMPERATURE DISPLAY WINDOW
•
The temperature is displayed in digital which is the best way to be read out. The digit is
shown as the set temperature when you are setting the temperature, and it will change to
be the real temperature of the inside cabinet after 10 seconds without being touched.
• When the temperature probe is out of order, the display window will show with "HH" or
"LL" instead of a digital figure while continuous buzz sound will be heard. In case of this
happens, this appliance is considerately designed to keep periodical running of
compressor and fans which helps to keep the coldness of the inside cabinet to protect
your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended to
have the appliance repaired immediately, as the spare periodical running can not
ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
• The temperature setting range is 5-22 º C (41-72 º F).
• Directly touch the
• The first touch on
the digital window.
• Touch the mark
touch the mark
• The digit will change to display the real temperature of the inside cabinet after 10
seconds without being touched.
Note: For the first time to use the appliance or to restart the appliance after having been
shut off for a long time, you may find a few degrees variance between the set temperature
and the displayed temperature. It is normal and everything of the appliance will be in the
order after a few hours running.
SELECTING FAHRENHEIT(º F) & CELSIUS (º C) DISPLAY
Touch the marks
can interchange the Fahrenheit and Celsius display.
CARE AND MAINTENANCE
CLEANING THE CELLAR
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wipe the inside surfaces with a sponge and baking soda solution. The solution should be
about 2 tablespoons of baking soda to 1 quart (approx. 1 liter) of warm water.
• Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before
placing back into the cellar.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
• Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with a
clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will scratch the
stainless steel with steel particles and rusting may occur.
or
mark to set the cellar temperature as you want.
or
mark will recall the previous set temperature displayed in
to increase the set temperature by 1º C(or by 1º F). On the contrary,
to decrease the set temperature by 1º C (or by 1º F).
with 2 fingers at the same time and hold for 5 seconds, you
22
Publicité
