Pedestal Installation; Tools Needed For Installation - LG WM0001HTMA Guide De L'utilisateur

PEDESTAL INSTALLATION

The pedestal accessory includes:
• Screws (18) †
• Drawer divider (1)
† Washer installation uses 16 screws
†† For dryer only

Tools Needed for Installation:

• Phillips-head screwdriver
• Wrench (supplied)
Make sure the leveling feet of the appliance
1
are fully retracted.
Once the leveling feet of the washer are fully
retracted, tighten all locknuts securely.
NOTE: The leveling feet on the dryer do not
have locknuts.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
O P T I O N A L AC C E S S O R I E S
• Retainers (4) ††
• Wrench (1)
Tighten all 4
locknuts securely
To ensure safe and secure installation, please
thoroughly follow the instructions below.
wWARNING
• Incorrect installation can cause serious
accidents.
• The appliances are heavy. Two or more
people are required when installing the
pedestal. There is a risk of serious back injury
or other injuries.
• Do not allow children to play in or on the
drawer. There is a risk of suffocation or injury.
• Do not step on the handle. There is a risk of
serious injury.
• If appliances are already installed,
disconnect them from all power, water, or
gas lines and from draining or venting
connections. Failure to do so can result in
electrical shock, fire, explosion, or death.
For dryer
For washer/combo
Position the appliance on top of the pedestal.
2
The washer feet will fit into the outermost
corner positions and the dryer feet will fit into
the innermost positions as shown.