Télécharger Imprimer la page

Linea 2000 Domo DO9140G Mode D'emploi page 39

Gril panini

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
www.domo-elektro.be
cool before putting on or taking off parts, and
before cleaning the appliance.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• CAUTION: In order to avoid a hazard this
appliance must not be supplied through an
external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
Never leave the appliance unattended while it is functioning.
Do not use or store this appliance outdoors.
Do not move the appliance while in use or when still hot. Allow to cool before
moving the appliance.
Do not use this appliance for other than intended use.
Check carefully that the voltage and frequency of the power net match the
indications on the rating label of the appliance.
The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local standards and requirements.
The surface(s) marked with this
symbol are liable to get hot during
use. It is advised not to touch the
surfaces of the appliance other
than the handles to avoid burns.
39
DO9140G

Publicité

loading