Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. Exisiting Nut
*******M* E: 40 Nm
2. M8x40 (10.9)
*******M* E: 25 Nm
3. M12x60 (10.9)
*******M* E: 75 Nm
4. M12x40 (10.9)
*******M* E: 120 Nm
5. M12x22 (100)
*******M* E: 160 Nm
6. M6x20 (10.9)
*******M* E: 20 Nm
*******M* P: 40 Nm
*******M* P: 25 Nm
*******M* P: 75 Nm
*******M* P: 105 Nm
*******M* P: 150 Nm
*******M* P: 20 Nm
© 669670/27-02-2023/7
Publicité
