Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-1881-005.book Page 14 Tuesday, May 31, 2016 8:21 AM
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
Use only original Würth accessories.
Product Description and Specifications
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Keyless chuck
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button*
5 Battery pack*
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Universal bit holder*
12 Screwdriver bit*
* The accessories illustrated or described are not
included as standard delivery.
Tool Specifications
Cordless Drill/Driver
Art. No.
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation
and during
storage
Recommended batteries
Recommended chargers
*Value dependent of the battery pack being used
** Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-1:
2
Drilling into metal: a
<2.5 m/s
h
Screwdriving without impact: a
h
BS 12-A
5700 111 X
V=
12
-1
min
0 – 400
-1
min
0 – 1300
Nm
30/15*
mm
10
mm
19
mm
7
mm
1.0 – 10
kg
0.95
°C
0 ... +45
°C
–20 ... +50
AKKU-LI-
12V/x,x Ah
AL 30-LI
2
, K=1.5 m/s
2
2
<2.5 m/s
, K=1.5 m/s
14
Publicité
