Teac SR-L280i Manuel Du Propriétaire page 23

MEMORY/CLOCK ADJ
To check the programmed order
In the stop mode, press the MEMORY button repeatedly.
The programme number, folder number and track/file
number will be shown on the display.
To clear the programme
Perform any of the following operations to clear the
programme.
< Switching the function.
< Ejecting a CD when the function is set to "CD".
< Removing a USB memory when the function is set to
"USB".
< Turning off (standby) the power.
/
To add a track to the end of the
programme
When the unit is stopped, press the PROGRAM button
repeatedly until "PXX" blinks on the display. Select a
folder number using the MP3/WMA FOLDER button
and a track/file number using a SKIP (. or /)
button and then press the PROGRAM button. The track/
file is added to the end of the programme.
To overwrite the programme
When the unit is stopped, press the PROGRAM button
repeatedly until the programme number to be changed
appears on the display.
Select a new folder number using the MP3/WMA
FOLDER button and a new track/file number using
a SKIP (. or /) button and then press the
PROGRAM button.
23