Setting The Clock - Teac SR-L280i Manuel Du Propriétaire

/
1
In standby mode press the CLOCK ADJ button.
"12 HR" or "24 HR" blinks on the display. If you want to
change the hour mode, press the . or / button.
< When no button is pressed for 10 seconds, the timer
setting mode will be cancelled.
2
Press the CLOCK ADJ button again.
The "hour" value blinks.
Press the TIME button (. or /) to set the
3
current hour.
4
Press the CLOCK ADJ button.
The "minute" value blinks.

Setting the Clock

MEMORY/CLOCK ADJ
Press the TIME button (. or /) to set the
5
current minute.
6
Press the CLOCK ADJ button.
The clock starts.
15