Braun ORAL-B IO8S Mode D'emploi page 11

on the display, you may toggle with the mode
button and select with the on/off button.
(10-16) «Mode selection» – toggle by pressing
the mode button and select default start mode
with on/off button.
(17) «Settings» – toggle through all modes
until you reach the option «Settings»;
to enter press the on/off button:
-> (19) manage Bluetooth settings (enable,
disable)
-> (20) select/change colour of Light Ring
-> (21) select/change language
-> (22) perform factory reset
(24) «Timer» – displays brushing time.
(25) «Battery status» – shows battery status
after use, when charging or when battery is low.
(26) «Exchange reminder» – reminds you
when to replace your brush head.
(27) «Brush feedback »– brushing feedback
is indicated with a smiley face.
«Brush waking» when handle is picked up,
lifted off the plugged-in charger or when you
press the on/off button the handle indicates
its readiness.
«Error messages» – «outside operating limits»:
you are operating or charging outside stand-
ard temperatures and/or above standard
battery current.
Brush heads
Oral-B offers you a variety of different Oral-B
iO brush heads (c/d) that only fit your Oral-B
iO toothbrush handle and can be used for
tooth-by-tooth precision cleaning.
Most iO Oral-B brush heads feature INDICATOR®
bristles to help you monitor brush head
replacement need.
With thorough brushing, twice a day for two
minutes, the colour will fade halfway approxi-
mately within 3 months, indicating the need to
exchange your brush head. If the bristles splay
before the colour recedes, you may exert too
much pressure on teeth and gums.
In general, we recommend replacing the brush
head every 3 months.
Connecting your toothbrush
to your Smartphone
The Oral-B App is available for smartphones
running iOS or Android™ operating systems.
It can be downloaded for free from App
Store (SM) / Google Play™ or you may scan the
QR code on the back page of this manual (i).
• Launch the Oral-B App. It will guide you
through the entire Bluetooth pairing
procedure. You may also find it under the
App´s settings (More -> Your brush).
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smartphone
(for directions please refer to your smart-
phone's user manual).
• Pairing is indicated via the Smart Pressure
Sensor light. Any App instructions will be
displayed on your smartphone.
• You may change Bluetooth settings at
any time on your handle via the display
-> Settings -> Bluetooth enable/disable.
• Keep your smartphone in close proximity
(within 5m distance) when using it with the
handle. Make sure the smartphone is safely
positioned in a dry place.
Note: Your smartphone must support
Bluetooth 4.2 (or higher)/Bluetooth Smart
in order to pair your handle.
Check app.oralb.com for compatible
smartphones and country availability
of the Oral-B App.
Caution: Follow your smartphone's user man-
ual to ensure your phone/charger is designed
for use in a bathroom environment.
Cleaning recommendations
After brushing, rinse your brush head under
running water with the handle switched on.
Remove the brush head and clean the handle
and brush head separately. Make sure water
runs inside the top of the handle as well as
inside the brush head. Wipe all parts dry and
let them air-dry before reassembling your
toothbrush again.
Unplug the charger before cleaning.
Clean the charger regularly with a damp cloth.
Please check individual cleaning instructions
for each accessory in its «Accessories»
paragraph.
9