SOLAC BV5723 Mode D'emploi page 11

ENGLISH
SERVICE:
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Measuring cup
B Jar Lid
C Jar
D Motor body
E Blades set
F Speed selector
G Juice Filter
H Cable winder
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
•
been removed.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
ASSEMBLING THE JUG AND THE FILTER:
Fit the jug onto the main body. To do so, po-
•
sition the jar (C) over the body (B) so that the
protrusions from the jug align with the grooves
of the body.
Turn the jug clockwise until it fits snugly (Fig.1).
•
Be sure to fit the jug onto the body correctly
•
otherwise it will not switch on.
If you would like to use the blender as a juicer,
•
place the filter (G) around the blade (E) (Fig. 2)
USE:
Unroll the cable completely before plugging
•
it in.
Ensure the blade fixing ring is fixed properly
•
to the jar (by turning counter clockwise) before
putting on the motor body. (Fig.3).
Place the jar onto to the motor unit; turn clock-
•
wise until the lock clicks into place. (Fig.1).
Put the ingredients, after having first chopped
•
them into small piece, into the jar with liquid (do
not exceed the maximum marker).
Put the lid on the jar; make sure it is properly
•
fixed in place.
Put the measuring cup in the lid (Fig. 1)
•
Connect the appliance to the mains.
•
Choose desired speed and start blending.
•
Speed P (position for turbo) Hold it in this po-
•
sition for as long as you want the appliance to
continue operating (maximum of 2 minute of
continuous operation).
During operation hold the lid on firmly using
•
both hands
If you wish to add more ingredients pull out the
•
measuring cup.
Add the ingredients and replace the measuring
•
cup.
Never remove the lid while the appliance is
•
operating.
To stop the appliance set the speed back to "0".
•
To avoid a fierce, start up of the fan, it is advis-
•
able to start off from the lowest speed position
and, once the fan has been switched on, pro-
gressively increase the speed to the desired
position.
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
•
by using the speed regulator control (F). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Stop the appliance, selecting position 0 on the
•
selector control.
Unplug the appliance from the mains.
•
Turn the mixing jar anticlockwise and remove it
•
from the motor body.
Clean the appliance.
•
"TURBO" FUNCTION
The appliance works in highest speed to
•
achieve optimal performance.
Select the speed P and hold this position for
•
as long as need. No more than 2 minutes at
a time.
FILTER OPERATION
PRECAUTIONS:
Never use the filter to process ingredients
•
thaåt are hotter than 80ºC.
Never overload the filter.
•
EN