Manufacturer's Data Regarding Emc - Riester ri-vital Mode D'emploi

15. manufacturer's data regarding emc

electromagnetic emissions:
the device is suitable for use in the electromagnetic environment indicated below. the
user must ensure that the device is used in such an environment.
test result / complied with
hF-emission Group 1
hF-emission class B
harmonic yes
emissions
Flicker yes
emission
Voltage yes
fluctuations
electromagnetic stability (immunity):
the device is suitable for use in the electromagnetic environment indicated below. the
user must ensure that the device is used in such an environment.
test test step
electrostatic +/-8 kV air +/-6
discharge kV contact
Voltage peaks +/-2 kV
mains +/-1
kV input
ri-vital
®
ManuFacturer's Data reGarDInG eMc
74
comment
the device must radiate electromagnetic energy
in order to fulfil its function. the functioning of
surrounding devices can be affected by this.
Iec 61000-4-2
the device is suitable for use in all facilities.
Iec 61000-4-4
Iec 61000-3-2
Iec 61000-3-3
Iec 61000-3-3
classification comment
+/-8 kV air +/-6 the floor should be made of a non-conductive
kV contact material.
the relative humidity should be at least 30%.
Iec 61000-4-2
+/-2 kV the mains power should correspond to the power
mains +/-1 kV in a typical business environment.
kV input
Output Output
current surge +/- 1kV difference +/-1kV difference
+/- 2kV common +/- 2kV common
mode Iec 61000-4-5 mode
Voltage drops <5% un(> 95%
drop in ut) see test step
test test step classification
Voltage drops 40% un (60% see test step
drpo in ut) with
five full changes.
Voltage drops 70% un (30% see test step
drop in ut) with
25 full changes
Voltage drops <5% un (60% see test step
drop in ut) in
five seconds
Power frequency 3a/m 3a/m
ri-vital
®
ManuFacturer's Data reGarDInG eMc
Iec 61000-4-4
the mains power should correspond to the power in
a typical hospital or business environment.
the mains power should correspond to the power
in a typical hospital environment. If uninterrupted
operation must absolutely be guaranteed, then an
uninterrupted power supply must be used.
comment
the mains power should correspond to the power
in a typical hospital environment. If uninterrupted
operation must absolutely be guaranteed, then an
uninterrupted power supply must be used.
the mains power should correspond to the power
in a typical hospital environment. If uninterrupted
operation must absolutely be guaranteed, then an
uninterrupted power supply must be used.
the mains power should correspond to the power
in a typical hospital environment. If uninterrupted
operation must absolutely be guaranteed, then
an uninterrupted power supply must be used. Iec
61000-4-11
In the event of operating problems, the device must
be placed at a greater distance to the source of the
magnetic fields. Iec 61000-4-8
note: un is the mains voltage for the test device
75