TAB
TAB
I
NSTALLATION
Using the IR emitter
IR emitters enable the system to control source devices
even if they are in a cabinet, on multiple shelves, or hidden
away. You should place an IR emitter on every device that
you want to control using the Lifestyle
To use an IR emitter with one device
1. Plug the IR emitter cord connector into the
®
Lifestyle
media center IR emitter connector.
2. Place the emitter so that the flat side is against the
front panel of the source device.
3. Using the supplied adhesive pad, attach the
emitter to the device.
20
TAB 6Italiano
TAB 5
®
remote.
TAB 4
TAB 3
Fi gu re 1 4 IR emitters positioned on device front panel
TAB 2
English