OBSIDIAN CONTROL SYSTEMS NETRON RP2 Guide D'installation page 8

I N S TA L L AT I O N I N S T R U C T I O N S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
USE CAUTION WHEN POWER LINKING OTHER MODEL DEVICES AS THE POWER
CONSUMPTION OF OTHER MODEL DEVICES MAY EXCEED THE MAXIMUM POWER
OUTPUT OF THIS DEVICE. CHECK SILK SCREEN FOR MAXIMUM AMPS.
Device MUST be installed following all local, national, and country commercial electrical and
construction codes and regulations.
POWER LINKING
USE CAUTION WHEN POWER LINKING AS THE POWER CONSUMPTION MAY
EXCEED THE MAXIMUM POWER OUTPUT ON THIS DEVICE. CHECK SILK SCREEN
FOR MAXIMUM AMPS.
MOUNTING OPTIONS:
- Truss-mounted using the M10 or M12 mounting holes for use with a truss clamp or appropriate
mounting hardware.
- Wall-mounted horizontally or vertically (brackets included)
- DIN Rail mounted horizontally or vertically (adapter included)
- The RP2 can be used Standalone, where the device sits on a firm flat surface.
Wall-Mounting Brackets
(brackets included
DIN Rail Mounting Adapter
8
(adapter included)