Samsung HW-S800B Mode D'emploi page 10

6
Info
7
SOUND MODE
8
VOLUME
9
WOOFER (BASS)
LEVEL
10
Bluetooth PAIR
11
CH LEVEL
Press the button to display information about the current function. (See page 7)
When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times.
By pressing the button, you can select the desired audio mode. Each time the mode changes, the Multicolour LED
blinks in white.
LED indicator
• Surround
Provides a wider sound field than standard.
• Game
Provides stereoscopic sound to immerse you in the action while gaming.
• Standard
Outputs the original sound.
• Adaptive Sound
Analyzes the content in real time and automatically provides the optimal sound field based on the
characteristics of the content.
• DTS Virtual:X
Immersive 3D sound from any content.
Push the button up or down to adjust the volume.
LED indicator
Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer
(bass) volume level to 0 (Default), press the button.
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolour LED changes as Red → Green → Blue in turn.
LED indicator
By pressing the button, you can adjust the volume of the each speaker.
• To control the volume of the each speaker select "Centre Level" or "Front Top Level" in Sound Settings, and
then adjust the volume between -6~+6 by using the Up/Down buttons.
• If the Rear Speakers (sold separately) are connected, the setting "Rear Level" and "Rear Top Level" is
supported. To adjust the volume of the "Rear Level" and "Rear Top Level" between -6 to +6 by using the Up/
Down buttons.
LED indicator
White Blinks X1
"Surround" → "Game" → "Standard" → "Adaptive Sound" →
"DTS Virtual:X"
White moves to right X1
Volume Up
Red → Green →
Blue Blinks
Pairing
"Ready to connect via Bluetooth."
White Blinks X1
"Centre Level" → "Front Top Level"
ENG - 10
White moves to left X1
Volume Down
Cyan Blinks X3
Connection is complete