Magmaweld miniSTICK Deluxe Manuel D'utilisation page 22

22 Maintenance and Service
4.3 Error Codes
EN
Error Code
TRR
USER MANUAL
Error
• The uptime of your machine may have
been exceeded
• Fan may not be working
Thermal
Protection
• The front of the air inlet-outlet ducts
may be blocked
• The machine working environment
may be too hot or stuffy
miniSTICK / miniSTICK Deluxe / megaSTICK / megaSTICK Deluxe
Cause
• Allow the machine to cool down by
Solution
waiting for a while. If the fault
disappears, try to use the machine at
lower amperage values
• If the problem continues, contact the
authorized service
• Check visually whether the fan is
working or not
• If the problem continues, contact the
authorized service
• Open the front of the air ducts
• If the problem continues, contact the
authorized service
• Make sure that the working
environment of the machine is not
excessively hot or stuffy
• If the problem continues, contact the
authorized service
www.magmaweld.com