Publicité
3
Press the operating lever to the right to
lightly press the parts to be welded onto the
plane disc on both sides.
When surface planing on one side, the
stopper must be swivelled out so that there
is some clearance between the plane and
the empty tension device. The tension
device and the plane cannot touch each
other in this way.
4
Press the start button on the handle to
switch on the electric plane and keep the
button pressed.
5
Release the start button to stop surface
planing.
18014405756138379 © 08-2022
996.253.00.0(09)
6
Swivel out the plane.
7
Check the fitting precision of the surface
planed cut surfaces by bringing together the
parts to be welded.
EN
29
Publicité
