Publicité
Clamping the pipes or fittings
1
Set the pipe support prisms to the required
dimension.
2
Fold up the brackets of the tension devices
and insert the parts to be welded.
18014405756138379 © 08-2022
996.253.00.0(09)
The pipes or fittings must be inserted in
such a way that the ends to be welded
protrude 1 cm from the tension devices.
The pipe support prisms must be as far as
possible from the tension devices. Branch
fittings and bends must be placed with the
straight section on the pipe support prisms.
3
Clamp the pipes or fittings with the
adjustable eccentric levers.
EN
27
Publicité
